Solvent Recovery System
 Summary of Solvent Recovery System
This equipment is an equipment to be completed usefully and re-employ- water-soluble organic solvent(WASTE STRIPPER).
Waste Stripper is separated a low boiling point impurities, High boiling point impurities and Pure Solvent that is completed usefully, as considering steam as heat transfer, consider a cooling water ( chilling water ) as a coolant.
Pass of the following concept drawing, WASTE STRIPPER is supplied HEATER ( Falling Film Type heat exchanger ) with and by being heated by steam, become vapor that become from solvent and a low boiling point impurities.
An high boiling point ingredient doesn't become vapor here, remain on the side of liquid, and draws out and takes it as WASTE SOLVENT A together with solvent. Though the vapor to be generated is supplied to the DISTILLATION TOWER to separate the low boiling point ingredient, in order to defend from that a liquid drop ( MIST ) including an high boiling point ingredient is carried by vapor, it sets up SEPARATER and separates MIST.
Distillation system is composed with a REBOILER and CONDENSER, with raise a low boiling point ingredient ( Moisture content) for fixed concentration by rectification effect depending on reflux operation, has for a function that discharge from CONDENSER. RECYCLED SOLVENT removed a low boiling point ingredient is recovered from REBOILER bottom.
This equipment is vacuum distillation system. For our originality a vacuum equipment establishes VACUUM PUMP UNIT that we KIMURA develop.
the following concept drawing
Distiller Type-NSKW
Standard Specification
| Type |
NKSW-30 |
NKSW-60 |
NKSW-100 |
| Flow Rate [l/hr] |
30 |
60 |
100 |
| Steam Consumption [kg/hr] |
20 |
40 |
80 |
| Electric[KW] |
2.3 |
2.5 |
3.5 |
| Dimension[mm] |
4000*600*3000 |
4000*800*3500 |
4000*1000*3500 |
| Weight[kg] |
1700 |
2500 |
4000 |
|
note
We can supply system depend on specification for customer.
|
